Fi-Shock® Heavy Duty In-Line Strainer with Compression Clip
$9.99
MSRP
In stock
Model
400-399
UPC: #017051243997
- Applies high-tensile compression on high-tensile fence line
- Adjust using standard wrench
- Under compression, automatically feeds into cog reel
- Should be installed every 2,000 to 2,500 ft
- Should be located in the middle of long runs of wire or between two corner posts
Fi-Shock® Heavy Duty In-Line Strainer with Compression Clip
This tool helps you tighten your high-tensile wire on your electric fence.
Our Fi-Shock® Heavy Duty In-Line Strainer with Compression Clip applies high-tensile compression on high-tensile fence line. Can be adjusted using a standard wrench. Under compression, it automatically feeds into cog reel. Galvanized to deter rust.
Install strainer every 4,000 feet and should be located in the middle of long runs of wire or between two corner posts. Strainers will need to be placed more often when there are corners, bends, dips or rises in the fence.
Fi-Shock® Means Leadership in Electric Fence Systems for Animal Containment and Control. Fi-Shock® provides safe, secure, superior quality electric fence products for all your fencing needs.
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.govwww.P65Warnings.ca.gov.
| Fi-Shock® Heavy Duty In-Line Strainer with Compression Clip - Specifications | |
|---|---|
| Model Number | 400-399 |
| Install | Every 2,000 to 2,500 ft |
| Locate | In the middle of long runs of wire or between 2 corner posts |
| Applies | High-tensile compression on high-tensile fence line |
Similar Products:
<
>
